commercial venues

TWO-STOREY HYGIENIC STANDARDS MULTISTORE

PROPRIETOR

ANDRIKOPOULOS COMMERCIAL S.A.

PROJECT DESCRIPTION

The company undertook the design, procurement and construction of the project described below.

The building construction works and electromechanical installations integrated reformation of the elevations of existing commercial building of total area of 1,865m2 on a 2,419m2 -sized site.

The design strategy involved cladding the existing envelope of the building with aluminum panels, while metallic shading louvres of elliptical cross-section were suspended at first-floor level.

The concept was carried through by lining the load-bearing frame of the existing building with Serena marble cladding made waterproof and bearing antigraffity protection, all the way up to the three sheds above ground level. At the same time the protection parapet in the sheltered ground-floor area was covered in granite panels sizing 1,00m * 0,60m.


HYGIENIC STANDARDS MULTISTORE

PROPRIETOR

ANDRIKOPOULOS COMMERCIAL S.A.

PROJECT DESCRIPTION

The company undertook the design, procurement and construction of the project described below.

The building construction works and electromechanical installations took up ground-floor area of 960m2 and basement-floor area of 967m2 on a 5,048m2 -sized site.

The design strategy involved structural-steel building framework, PVC roofing and aluminum panels cladding. The concept was carried through by lining part of the load-bearing frame of the building with Serena marble cladding made waterproof and bearing antigraffity protection, while metallic shading louvres of elliptical cross-section were utilized to hold the company's corporate identity.


SHOPPING CENTER (OFFICE - COMMERCIAL USE)

PROPRIETOR: AKINITA PATRAS S.A.

PROJECT DESCRIPTION

Covering a total area of 5,500m2, the company assumed the design, procurement and construction of the project on a 3-acre site.

It is a composite structure of reinforced concrete slabs and columns, and structural-steel roof framework.

The main building areas were orientated around a 100m2-size atrium, which sheds ample natural air and light in the core of the building, ensuring aesthetic comfort for users in every level, while it creates microclimate, required for sustainable management of the building's consumed energy.

Due to large glass-pane surface, warm air is rising towards the atrium's glass roof, where it vents out through automated openings, reducing the use of air-conditioning.

Shading is accomplished by metal louvres on windows facing south and south-west.

Applied ceramic ventilated facade technology clearly contributes in preserving a stable, natural, insulating behavior of the envelope, so that the building is vested in a monolithic material, which allows natural-air circulation through the cladding system, a fact which makes the energy footprint of the building easier to manage.

AUTOMOTIVE EXHIBITION CENTER

PROPRIETOR: I. TSIORIS

PROJECT DESCRIPTION

The company assumed the design, procurement and construction of the project (construction works and electromechanical installations of approximately 5,185m2, and landscape works of 9,600m2 on a 12-acre site).

The building consists of a ground-storey exhibition area and workshop departments, as well as spacious store area in the basement floor.

The construction included structural-steel framework, composite slabs, side and roof PVC paneling, and application of SERBOND cladding system.

What seemed like a non-feasible curvilinear roof structure above the exhibition area, initially, proved none-the-less to be a great opportunity to apply PVC roofing membrane system for the specific project to facilitate all twists and turns required by the architectural concept.


TWO-STOREY EXHIBITION CENTER

PROPRIETOR: ALFA CASA S.A.

PROJECT DESCRIPTION

The company undertook the design, procurement and construction of the project (construction works and electromechanical installations of approximately 8,680m2, and landscape works of 3,275m2 on a 6,195m2-sized site).

It is a composite structure of reinforced concrete and structural steel.

The main areas of the building are its basement, the ground and 1st floor, all composing individual exhibition halls.


AUTOMOTIVE PARTS SUPPLY & EXHIBITION CENTER

PROPRIETOR: A. VASILEIOU

PROJECT DESCRIPTION

The company assumed the design, procurement and construction of the project (construction works and electromechanical installations of approximately 680m2, and landscape works on a 570m2-sized site).

It is a composite structure of reinforced concrete body core and structural-steel roof framework.

MERCHANT WAREHOUSE

PROPRIETOR: EFSTRATIADIS S.A.

PROJECT DESCRIPTION

The company assumed the design, procurement and construction of the project (construction works and electromechanical installations of approximately 3,335m2, and landscape works of 3,470m2 on a 4,500m2-sized site).

The building consists of a basement floor, the warehouse ground-storey floor, the exhibition area and separate office area.


JUMBO MULTISTORE - ROUMELIOTIS SUPERMARKET

PROPRIETOR

G. ROUMELIOTIS SUPERMARKET COMMERCIAL S.A.

PROJECT DESCRIPTION

The company undertook the procurement and reformation of existing commercial building of total area of 1,525m2 on a 4-acre site.

The design strategy involved cladding the existing envelope of the building with polyurethane panels following corporate identity colours. The multistore entry-exit points were marked by a new parapet cladded in aluminum sheets.


AUTOMOTIVE EXHIBITION CENTER

PROPRIETOR: MOTORLAND S.A.

PROJECT DESCRIPTION

The company undertook the design, procurement and construction of the steel-structure project described below (construction works and electromechanical installations of approximately 1,665m2, and landscape works on a 1,160m2-sized site).

The main areas of the building are its basement floor and the ground-storey exhibition area.


PETROL STATION & CARWASH

PROPRIETOR: K. SPIROULIAS

PROJECT DESCRIPTION

The company took over the construction of the steel-structure project described below (construction works, electromechanical installations and landscape works).